What’s the best PC case? Some PC gamers might think of a case as a purely aesthetic choice, but the best case for PC gaming can keep temperatures low, prevent thermal throttling, keep things stable, and give you more headroom for overclocking your CPU and GPU.
The best PC case can be almost as important as getting the best graphics card or gaming CPU. Whether you want to build something that replaces your console, a fantastic array of RGB lights, or a chassis with superb airflow, you’ll find the right choice among our tested options.
Why you can trust our advice ✔ At PCGamesN, our experts spend hours testing hardware and reviewing games and VPNs. We share honest, unbiased opinions to help you buy the best. Find out how we test.
Best PC case in 2025:
Best PC case with a screen
Hyte Y70 Touch specifications:
Case type |
Mid tower |
Motherboard support |
E-ATX, ATX, micro-ATX |
Panels |
2 x glass panels, 1 x screen, 1 x metal panel |
Cooling |
Room for 3 x 120mm/2 x 140mm side fan mounts, 3 x 120mm/2 x 140mm base fan mounts, 3 x 120mm/2 x 140mm rear fan mounts (no fans included) |
I/O |
2 x USB 3.2 Gen 1, 1 x USB 3.2 Gen 2, 1 x 40mm jack |
Dimensions |
470 x 320 x 470mm |
Reasons to buy
- Fantastic 4k touch screen
- Loads of room for large components
- Excellent water cooling potential
Reasons to avoid
- No fans included
- Takes up a lot of space
- Motherboard is difficult to access with GPU installed
We picked the Hyte Y70 Touch as the best PC case overall because of its striking design, its incredible potential for water cooling, and of course, its gorgeous interactive 4k screen. Featuring a 60Hz refresh rate, a massive 1,100 x 3840 resolution, this IPS touch screen is really flashy, and in addition to widgets that give you an overview of your PC, you can also use it as a second display, which is pretty nifty.
While we were impressed by the addition of the screen, we did have a few little nitpicks. For example, it doesn’t come with any fans, so unless you’re planning to reuse fans from another setup, you’re going to have to fork out for new ones. Meanwhile, when using a vertically mounted GPU, it can be kind of awkward to access the motherboard.
However, the problems with this case aren’t going to be problems for everyone, and it does look absolutely fantastic. On top of that, its large size lends itself well to the use of large components, and with so much space inside, this is essentially a blank canvas that you could do anything with.
Read our full Hyte Y70 Touch review.
Jonsbo D30 specifications:
Case type |
Integrated |
Motherboard support |
micro-ATX |
Panels |
1 x 3mm tempered glass panel, 1 x steel panel |
Cooling |
3 x 120mm side fan mounts (with fans), 3 x 120mm/2 x 140mm base fans mounts (fans not included), 3 x 120mm/2 x 140mm roof fan mounts (fans not included), 1 x 120mm rear fan mounts (120mm fan included) |
I/O |
1 x USB-C 3.2 Gen 2, 2 x USB 3 |
Dimensions |
290 x 466 x 495mm |
Reasons to buy
- Fantastic cooling
- Both air and water-cooling support
- Elegant design
Reasons to avoid
- Limited features and accessories
- Lacks USB 3.2 Gen 2 Type-C support
- Poor cable stowage
The Jonsbo D30 is our pick for the best mid-tier PC case, because as much as it might lack things like a built-in screen, RGB lighting, or decent cable stowage compartments, it remains a fantastic choice of case. In addition to three bundled 120mm fans (which you can mount wherever you please), there are several other mounts and easy solutions for both air and water cooling – although we do wish it had some fans in the front section.
If you’re looking to fit a custom PC into a smaller space, then the Jonsbo D30 is an ideal choice. Its wonderfully compact design makes it easy to fit in most setups – although it is a little on the long side. The length is a side effect of the room made for large components though, and that’s one of the things we love about it. It feels like they could have added more cable stowage though, as it can feel ever so slightly cluttered.
There are other cases out there that have more to offer, like the Cooler Master Cosmos C700M below, which offers RGB lighting, broader motherboard compatibility, and fantastic cable storage features – but if you just want something that will get the job done, is not too expensive, and which has great cooling options, it’s hard to be disappointed with the Jonsbo D30.
Read our full Jonsbo D30 review.
NZXT H7 Flow RGB (2024) specifications:
Case type |
Mid-tower |
Motherboard support |
E-ATX, ATX, micro-ATX |
Panels |
1 x steel, 1 x glass |
Cooling |
3 x 120mm fans |
I/O |
2 X USB 3.0, USB 3.2 Gen 2 Type-C, headphone jack |
Dimensions |
244 x 468 x 544mm |
Reasons to buy
- Fantastic cable management
- Loads of room for air or water cooling
- It looks delightful
Reasons to avoid
- More fans can’t improve airflow
- Can be ugly without fans in the base
- Obscures fan frame lighting
The NZXT H7 Flow has been around for some time, but the updated 2024 model is head and shoulders above what came before. The most notable upgrade is the addition of a vertical PSU mount, which gives more room for liquid cooling radiators and therefore makes it better suited for overclocking than its predecessor.
The mount does also make room for extra fans, but it is somewhat limited in that area. During our testing, we found it was two degrees warmer than the NZXT H6 Flow RGB, and even with the addition of extra fans in the rear, roof, and base mounts barely brought the temperature down by a degree.
Nonetheless, where it fails in airflow, it succeeds in cable management. With a glass panel, you want your setup looking tidy, rather than like an unpleasant jumble of tangled wires. Not only can you stow things away in front of the PSU, but it comes with plenty of velcro cable anchors, and there’s a generous cable-stowing area under the fan mounts (although this could be better hidden).
If you’re keen on having a quiet setup, this is definitely one of the less noisy models we’ve seen over the years. There is a very slight high-pitched sound coming from the fans when running at full speed, but if you run them at 75% it’s essentially silent. At 50%, which would be fine for most ordinary operations, it won’t make a sound.
Of course – the RGB lighting in this case is a big selling point (one that you’re paying more for). If you’re not a fan of that aesthetic, you can go for the non-RGB version of the NZXT H7 Flow, but we reckon it’s a rather stylish-looking case. The build quality is fantastic too, and you can tell it’s been made with premium materials as soon as you get your hands on it. If you’ve got a carefully decorated gaming space, this’ll fit right in.
Read our full NZXT H7 Flow RGB (2024) review.
Best PC case for cable management
NZXT H6 Flow RGB specifications:
Case type |
Mid Tower |
Motherboard support |
ATX, micro-ATX, mini-ITX |
Panels |
1 x tempered glass, 1 x steel panel |
Cooling |
3 x 120mm front fan mounts (fans included), 3 x 120/2 x 140mm roof fan mounts (fans not included), 1 x rear 120mm fan mount (fan not included), 2 x 140mm base fan mounts (fans not included) |
I/O |
2 x USB 3.2 Gen 1 Type-A, USB 3.2 Gen 2 Type-C |
Dimensions |
287 x 415 x 435mm |
Reasons to buy
- It is beautiful
- Excellent built-in cooling
- Plenty of room for cables
Reasons to avoid
- Roof cannot be removed
- Large footprint
- Short fan and RGB cables
Nobody likes to see loads of cables strewn all over the place. It’s not only unsightly but also unsafe. The NZXT H6 Flow RGB managed to help you avoid that problem with the addition of a large cable stowing area which helps keep everything tidy. It’s also quite an attractive case, which will help to further boost your gaming room’s decor.
It is a rather large case though, which might be off-putting for anyone dealing with a smaller space. But to be honest, there’s a lot more to love than there is to dislike here – there’s an excellent built-in cooling system (including three 120mm fans) which saves you from having to shill out for extra coolers. However, if you want to overclock your PC, there is plenty of room for loads of additional fans to keep even the most powerful setup running smoothly and quietly.
All the uglier parts of your CPU (e.g. PSU and storage drives) are kept in a hidden chamber behind the motherboard, giving you a pretty view through the glass panel. The whole thing has plenty of ventilation holes throughout that’ll help keep everything cool too. All around, it’s a well-made case.
Read our full NZXT H6 Flow RGB review.
Corsair 4000D Airflow Tempered Glass specifications:
Case type |
Mid tower |
Motherboard support |
ATX, Micro ATX, Mini ITX |
Panels |
1 x glass panel, 1 x metal panel |
Cooling |
2 x 120mm fans |
I/O |
1 x Type-A USB, 1 Type-C USB, 1 x 3.5mm jack |
Dimensions |
453 x 230 x 466mm |
Reasons to buy
- Offers amazing airflow
- Tempered glass side
- Affordable
Reasons to avoid
- Side panels hard to remove
- Has a few small spacing issues
- I/O selection not great
Have you been burned (literally and figuratively) but a custom PC setup that didn’t have sufficient airflow? Well, if you want to be completely sure that you can avoid this happening again, we recommend going for this case. Its front panel is designed to take in as much air as possible, and it has room for three 120mm fans or even a 360mm AIO cooler.
Its biggest drawback comes from the fact that its side panels are quite difficult to remove. If you’re somebody who routinely adds new components to your gaming PC, this is going to get irritating fast. You might also struggle a bit when it comes to fitting things into the upper regions of the case, where spacing can get a bit tight. It could do with a better I/O selection as well.
We don’t want to end a negative though – this is a beautifully designed piece of hardware that is unrivalled when it comes to airflow. This option will not only look fantastic as part of your setup, but it’ll keep everything cool even when you’re playing the most processing-intensive of games.
Read our full Corsair 4000D Airflow review.
Fractal Design Torrent specifications:
Case type |
Mid Tower |
Motherboard support |
E-ATX, ATX, micro-ATX |
Panels |
Closed panels |
Cooling |
3 x 120/140, 2 x 180mm front fan mounts (1x 180mmm fans included), 1 x 120/140mm rear fan mount (fan not included), 3 x 120/140mm, 2 x 180mm base fan mounts (3 x 140mm fans included) |
I/O |
1 x USB-3, 1 x USB 3.2 Type-C, stereo, mic |
Dimensions |
242 x 544 x 530mm |
Reasons to buy
- Physically attractive
- Fantastic airflow
- Large but quiet fans
Reasons to avoid
- Hard to find
- No RGB lighting hub
- Needs more storage space
Fractal Design is well-known for making some of the prettiest PC cases on the market. If you’re somebody with a gorgeous gaming space who doesn’t just want an ugly grey or black block as a case, the Torrent offers a suitably stylish aesthetic design. This beauty isn’t skin deep, as this case performs well.
One of its biggest strengths is its airflow capacity. Partially helped by its lack of CPU cover, this case is great at keeping even overclocked PCs cool while they run (even if its storage space is a bit limited). During our testing process, we found that it offered much better airflow than either the Corsair 7000D Airflow or the Be Quiet! Silent Base 802.
With eleven fan mounts and room for 180mm fans throughout, it only comes packaged with one 180mm fan. It saves you from collecting redundant fans if you already have a few from your current setup.
This is an expensive case, and it’s getting harder to find since being discontinued. But we think it justifies the price tag quite easily. Although, here’s a subjective and potentially controversial point – it lacks an RGB lighting hub. I know some people won’t care because RGB lights aren’t for everyone, but if this is a feature you’re passionate about (and want to align with your other devices) this will feel like an odd omission.
Read our full Fractal Design Torrent review.
Be Quiet Dark Base 701
Best PC case for space
Be Quiet Dark Base 701 specifications:
Case type |
Mid Tower |
Motherboard support |
E-ATX, ATX, M-ATX, Mini-ITX |
Panels |
1 x tempered glass, 1 x metal panel |
Cooling |
3 x 140mm PWM |
I/O |
2 x USB, 1 x USB Type-C, 1 x mic jack, 1 x headphone jack |
Dimensions |
67 x 60 x 35cm |
Reasons to buy
- It offers loads of space
- Accessible
The Be Quiet Dark Base 700 once occupied a space on this list, but the Be Quiet Dark Base 701 has now succeeded it. Essentially, it has all the benefits of its predecessor (it’s quiet and spacious), but it takes it even further – coming with an extra built-in fan, a few extra ports, and even more space.
Something of this size could house many of the best CPU coolers inside it without any problem, and it’ll keep them running as quietly as possible (living up to its name). The only downside is that, as it is bigger than the already large older model, its footprint may be too large for quite a lot of setups. You can even squeeze the best AIO coolers in there with no difficulty.
If you do opt for it, the addition of the tempered glass panel is fantastic – combined with subtle RGB lighting, it offers a lot of aesthetic charm. It may lack the flourish of an interactive screen like the Hyte Y70 Touch, but not everyone will want or need anything like that anyway.
The Be Quiet Dark Base 701 is ideal for anyone who wants to build their first gaming PC and plans to go big. There’s a removable bracket at the top, which gives you easy access to everything within – this alone is pretty handy, but on top of that, it’s been designed to enable users to install drives without the need of tools. It’s wonderfully accessible.
Cooler Master Cosmos C700M
Best high-end PC case
Cooler Master Cosmos C700M specifications:
Case type |
Full tower |
Motherboard support |
ATX, Micro ATX, Mini ITX |
Panels |
1 x curved glass panel, 1 x curved metal panel |
Cooling |
4 x 140mm fans |
I/O |
4 x Type-A USB, 1 Type-C USB, 2 x 3.5mm jack |
Dimensions |
651 x 306 x 650mm |
Reasons to buy
- Absolutely gorgeous
- RGB lighting options
- Excellent cable management
Reasons to avoid
- Expensive
- Too large for smaller set-ups
If money is no object to you, the Cooler Master Cosmos C700M is the case you’re going to want to get. Its curved glass side panel looks absolutely fantastic, and this is a rare example of a PC case that has RGB lights both inside and out. If you’ve got one of the best gaming motherboards, you’ll even be able to synchronize the lighting across them.
Its enormous size means that you can fit practically anything inside it. If you know how to overclock your CPU and GPU, you know that the extra space will be essential (though it is less convenient for anyone with a simpler setup). Heck, it even has space to install a DVD drive, which is going to be good news for anyone who wants to play their old physical games, or just wants to be able to watch their movie collection on their gaming PC.
Of course, this is a very expensive choice, so it’s not going to be for everyone – but let us reassure you, you get what you pay for. There are toolless drive slots, spaces for 5.25-inch bays, and the cable management on this thing is fantastic. The perfect PC case may not exist, but this thing comes pretty darn close.
How to choose the best PC case
Not all PC cases are created equal, and you may often find that the best-looking case isn’t quite right for your needs. To make sure you get the case that’s right for your choice of components, here’s what to consider:
-
Component clearance: It can be frustrating to find that your graphics card or CPU cooler won’t fit in your case once you’ve ordered your components, so make sure there’s enough room for all your chosen kit. CPU cooler clearance and maximum graphics card length are listed in our case reviews and manufacturers’ specs lists.
-
Airflow: If you plan to build a high-end PC but won’t be water-cooling it, you’ll benefit from having a case with plenty of airflow. That means vents in the front panel to bring air into the case, and vents in the roof, rear, and side panel to help it escape. Case manufacturers often make windowed and mesh versions of their cases for this reason, and while mesh doesn’t look as pretty as glass, it can give hot-running components some breathing space, particularly if space is tight. Ideally, you want at least one fan in the back acting as an exhaust for hot air, and two in the front to bring cool air into the case.
-
Fan mounts: It’s not just the number of fans supplied with your case that’s important, but room for more fans and radiators. If you plan to install an AIO cooler or water-cooling system in your PC, for example, you need to ensure your case has room for the radiator and the fan mounts to fit it. We recommend installing your AIO cooler in the roof or front of your case if possible and remember that a radiator will be slightly larger than the fans mounted to it, as it also needs to make room for the inlet and outlet for the tubing. Check your case’s specs list to ensure your AIO cooler will go in it.
-
Windows: If you want to show off your fancy hardware and all its lights, you want a case with a window. Tempered glass panels are great here, and some of the latest cases have several glass panels so you can present an aquarium-style view of your hardware. Bear in mind that glass blocks airflow, however, and while that won’t be a problem for a lot of standard case designs, you don’t want to put an air-cooled graphics card in a vertical mount right up against a piece of glass, as it won’t have room to breathe.
-
Cable routing: If you want to build a tidy PC, you’ll need plenty of space to stow cables, and hide them. Look for rubber-grommeted cable routing holes by the motherboard tray, and a cover over the PSU area, as these are great places to route your cables out of sight. Some of the latest cases also give you room to root cables directly to the back of the motherboard if your hardware supports it – look for compatibility with Asus BTF and MSI Project Zero if you want a case that supports this.
FAQs

Which PC case brand is best?
The answer to this question will depend on your taste and your needs, but anything from Corsair, Cooler Master, or Be Quiet in particular will be a notch above many of the cheaper, unknown brands.
Is a black or white PC case better?
In most cases, this is a matter of style. Which would look best in your room? However, if your gaming PC is going to be positioned in direct sunlight, then we recommend going for a white one so that it can reflect the light that shines onto it and reduce the risk of overheating.
Does PC case airflow matter?
Yes, absolutely. Especially if you are planning to push your gaming PC to the limit. While it might be the case that you can achieve a lot with CPU coolers, it’s always going to be better to go for a case that facilitates airflow as much as possible to reduce the risk of overheating as much as possible.
Which PC case has the best airflow?
We recommend the high-end PC case, the Corsair Carbine 175R, the second option on our list. Though every case on this list has good airflow, that one is the best that we’ve come across.
Will my components fit?
If you’re going for a smaller mini ITX case, be sure to check out the supported dimensions for larger components like the best graphics card or the best CPU cooler, as they won’t always fit. You’ll also need to check whether you’ll have to purchase an SFX power supply rather than the usual larger ATX power supply. In addition, these smaller cases can be a headache to build in depending on their design, although Cooler Master’s MasterBox NR200 is an exception to this problem thanks to its 360-degree dismantling granting you easy access to all areas.
For more on finding the right case and building the right setup, read our guide on how to manage cables. You might also be interested in reading our gaming PCs vs gaming laptops piece, for more information on getting the right setup for you. Having second thoughts about building your own? Our guides on the best mini gaming PC and the best gaming PC will give you some ready-made options to consider.